3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader

35BAYCF2IDE

SAME DAY SHIPPING AVAILABLE!

In-stock items from the UK if ordered by 3pm*

Photo Gallery

Connect a CF card to a computer through an IDE connector

£22.99 GBP exc VAT
£27.59 inc VAT

In Stock: United Kingdom : 62

Prices may be lower from Resellers: View all Resellers View all Distributors

Overview
Technical Specifications
Related Products
Drivers & Downloads

This Compact Flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM Micro Drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive.

The CF/IDE adapter can be installed in the computer case through simple mounting in an available 3.5in drive bay, for connection to the computer IDE bus through either a 40 or 44-pin connection.

Designed and constructed to provide a reliable media card platform, the CF IDE adapter is backed by StarTech.com's 2-year warranty.

The StarTech.com Advantage

Quick and driver free installation into any IDE 40 pin and 44 pin slot
Easily swap cards in and out with built-in push button ejector

Features

Quick and driver free installation into any IDE 40 pin and 44 pin slot
Fully compatible with Compact Flash Type I/II and IBM Micro-drive
Allows Compact flash card to be used as bootable storage
Easy to use jumpers offer simple master/slave drive setting
Can be mounted in the front or rear panel of your case, to fit into any 3.5” bay or available expansion slot
Easily swap cards in and out with built-in push button ejector

Applications

Use your compact flash card as a bootable and removable device
Excellent for swapping operating systems quickly without having to take your computer apart.
Connect your compact flash card to a 40 or 44 pin IDE slot

Product Numbers

Ingram Micro UK	V931189
Micro-P	STC35BAYCF2IDE
EntaTech	STH-35BAYCF2IDE
UPC Code	065030824194

Product appearance and specifications are subject to change without notice.

Technical Specifications

Warranty Information
Warranty	2 Years
Hardware
Interface	IDE
Connector(s)
Drive Connectors	1 - CompactFlash (50 pin) Slot
Host Connectors	1 - IDE (40 Pin; EIDE/PATA) Male
	1 - SP4 (4 pin; Small Drive Power) Male
Performance
Maximum Data Transfer Rate	133 MBps
Memory Media Type	CF (Compact Flash I/II Card)
Physical Characteristics
Product Length	97 mm [3.8 in]
Product Width	100 mm [3.9 in]
Product Height	25 mm [1 in]
Product Weight	145 g [5.1 oz]
Environmental
Humidity	5% ~ 85% RH
Operating Temperature	-55°C to 85°C (-67°F to 185°F)
Storage Temperature	-55°C to 85°C (-67°F to 185°F)
Special Notes / Requirements
Note	This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards.
Packaging Information
Shipping (Package) Weight	0.3 kg [0.6 lb]
What's in the Box
Included in Package	1 - Compact Flash to IDE Adapter
	1 - 3.5” Enclosure
	1 - Full Profile Expansion Slot Bracket
	1 - SP4 to LP4 Molex Power Cable
	1 - Instruction Manual